Skip to content
Study system

Grade Conversion for Germany: The Modified Bavarian Formula

German universities convert foreign grades with the modified Bavarian formula, x = 1 + 3 × (Nmax − Nd) / (Nmax − Nmin), where Nmax is the best grade of your system, Nmin the lowest pass and Nd your own grade. For Turkish degrees uni-assist takes Nmin from the minimum grade required to graduate (Diploma Supplement point 4.2), not the pass mark of a single course, and that choice alone can move your result by half a grade. In Germany 1.0 is the best grade and 4.0 the lowest pass, and averages are cut, not rounded, after the first decimal.

Article 6 of 9. 10 min read. Verified against 14 official sources, 30 October 2026.

Bu rehberi Türkçe oku

If you apply to a German university with a foreign degree or school certificate, your grade is translated into the German scale before anyone compares it with other applicants. The method is the same almost everywhere, the modified Bavarian formula. What differs, and what decides your result, is which numbers go into it and whether the outcome is cut or rounded. This guide shows the calculation with worked examples, explains the rule uni-assist applies to Turkish degrees, and then sets out the German scale itself. The wider system is summarised in the study overview.

The empty large lecture hall of the chemistry lecture centre at Heidelberg University: steeply rising rows of light wooden folding seats, a central staircase and a lecturer's desk at the front.
The large lecture hall of Heidelberg University's chemistry lecture centre at Im Neuenheimer Feld. Written exams in big courses are often held in halls like this and graded on the German scale, on which a lower number is a better grade.Photo: Tyr-asd / Wikimedia Commons, CC BY 4.0

The modified Bavarian formula, step by step

The formula maps the passing range of your system onto the German passing range from 1.0 to 4.0: x = 1 + 3 × (Nmax − Nd) / (Nmax − Nmin). Nmax is the best possible grade in your system, Nmin the lowest passing grade, Nd your grade, and x the German result. A grade equal to Nmax becomes 1.0, a grade equal to Nmin becomes 4.0. For university entrance certificates, the KMK agreement on foreign grades says the result is fixed to one decimal place without rounding; the anchor values Nmax and Nmin come from the assessment proposals of the KMK's Central Office for Foreign Education (ZAB).

  1. Find Nmax

    The best grade your system awards: 4.00 on a four-point GPA scale, 100 on a percentage scale.

  2. Find Nmin

    The lowest grade with which you pass. For a Turkish degree, uni-assist uses the minimum grade required to graduate (Diploma Supplement point 4.2), not the pass mark of a single course.

  3. Take your overall grade (Nd)

    The cumulative grade on your transcript or degree certificate, not a single semester's average.

  4. Calculate and cut

    Subtract Nd from Nmax, divide by Nmax minus Nmin, multiply by 3 and add 1. Keep one decimal and drop the rest: 2.29 is 2.2.

Your grade (Nd)NmaxNminCalculationGerman grade
3.004.002.001 + 3 × 1.00 / 2.002.5
3.004.001.001 + 3 × 1.00 / 3.002.0
3.204.002.001 + 3 × 0.80 / 2.002.2
3.504.002.001 + 3 × 0.50 / 2.00 = 1.751.7 (cut, not rounded)
80100501 + 3 × 20 / 502.2
80100601 + 3 × 20 / 402.5
Worked examples (arithmetic illustrations, not official values for any university)

The first two rows are the reason this guide exists. The same 3.00 GPA becomes a 2.5 if the lowest pass is taken as 2.00, and a 2.0 if it is taken as 1.00. In programmes that select by grade, half a German grade can make the difference between admission and rejection. TUM offers an online calculator for the formula, and it too asks you for the lowest passing grade of your university's system.

Which lowest pass mark counts for a Turkish degree

A Turkish transcript can involve two different minimums: the pass mark for a single course and the minimum grade needed to graduate. uni-assist's country notes for Türkiye are explicit that the course or semester minimum is irrelevant for the conversion: it uses only the minimum grade required for the degree, usually stated in point 4.2 of the Diploma Supplement. Degrees completed before 2005 on a 100-point scale need the examination regulation that applied at the time (the Önlisans ve Lisans Eğitim-Öğretim ve Sınav Yönetmeliği), which uni-assist asks applicants to obtain from the Official Gazette (resmigazete.gov.tr).

Course-by-course conversions exist too, but for a different purpose. For exchange students the Duale Hochschule Baden-Württemberg (DHBW) publishes a recognition table for Turkish universities that use a 4.00 scale with DD as the lowest pass: AA 1.0 · BA 1.5 · BB 2.0 · CB 2.5 · CC 3.0 · DC 3.5 · DD 4.0 · FD/FF 5.0. It is used to transfer the grades of individual courses taken during an exchange, not to calculate an admission grade.

Anchor valuesEckwerte Nmax / Nmin
The best grade (oberer Eckwert, Nmax) and the lowest passing grade (unterer Eckwert, Nmin) of a foreign grading system, the two fixed points of the Bavarian formula. For school certificates the ZAB sets them in its assessment proposals; for degrees, uni-assist and the universities take them from your documents.
Diploma Supplement, point 4.2Diploma Supplement, Abschnitt 4.2
The section of the Diploma Supplement that describes the grading scheme of the degree, including the minimum grade needed to pass it. German applications rely on it because it is official, standardised and usually issued in English.

Cut or rounded: why two universities can disagree

The KMK agreement fixes the result to one decimal without rounding, and so does TUM for its own averages. Not every university converts the same way. Leuphana University Lüneburg, for example, when it converts grades its own students earned abroad, rounds the result to the nearest step of the German scale, with exact midpoints going to the better grade, so a calculated 2.2 becomes a 2.3 there. Combined with the choice of Nmin, the same transcript can produce slightly different German grades at different universities. That is not an error you can appeal against; it is each university's method, and the only safe approach is to calculate with the method the target programme publishes.

FactorPossible choicesEffect
Lowest pass (Nmin)Graduation minimum (uni-assist for Türkiye) or course minimumHalf a German grade in the 3.00 example above
DecimalsCut after one decimal (KMK, TUM) or rounded to a German step (e.g. Leuphana)Usually 0.1 to 0.2
Which grade is convertedOverall degree grade, or a recalculated average of relevant modulesDepends on the programme's rules
Sources of difference in a converted grade

School certificates and the Studienkolleg: how the overall grade is set

For bachelor's admission, the KMK agreement sets out which documents count. If your school certificate gives access only after a Feststellungsprüfung at a Studienkolleg, the overall grade is the arithmetic mean of your converted school grade and the Feststellungsprüfung grade. If your access to a subject rests on a completed degree, only that degree is used. The ZAB's anchor values for foreign school certificates sit in the anabin database; do not trust a Lise conversion that does not come from the university or uni-assist. For a Turkish Lise Diploması, anabin also requires a YKS placement before the certificate gives any access at all. The routes themselves are explained in bachelor's degrees in Germany.

The German grading scale

German universities such as TUM and RWTH Aachen grade individual exams in steps of 0.3 around whole grades: 1.0, 1.3, 1.7, 2.0, 2.3, 2.7, 3.0, 3.3, 3.7, 4.0 (pass) and 5.0 (fail). The scale runs the opposite way from a Turkish GPA: lower is better, and 4.0 is the lowest pass. RWTH Aachen, for example, excludes the steps 0.7, 4.3, 4.7 and 5.3; pass/fail assessments are recorded as passed or failed. What happens after a 5.0, and how many retakes you get, is explained in exams and retakes in Germany.

GradeGerman termMeaning (RWTH's translation)
1.0, 1.3sehr gutVery good: an excellent performance
1.7, 2.0, 2.3gutGood: a performance above average
2.7, 3.0, 3.3befriedigendSatisfactory: meets the requirements
3.7, 4.0ausreichendSufficient: meets the requirements despite shortcomings
5.0nicht ausreichendInsufficient: a fail
German grades and what they mean

Module and overall grades are averages, and they are banded differently. At TUM: up to 1.5 sehr gut; 1.6–2.5 gut; 2.6–3.5 befriedigend; 3.6–4.0 ausreichend; 4.1 and worse nicht ausreichend. Averages keep one decimal, and further decimals are cut, so a 1.56 is a 1.5 and still 'sehr gut'. TUM awards 'mit Auszeichnung bestanden' (passed with distinction) for an overall grade up to 1.2. In North Rhine-Westphalia the law also requires an ECTS grade alongside the German one, which universities may limit to the overall grade (HG NRW § 63(1)).

Passed with distinctionmit Auszeichnung bestanden
The top verdict on a German degree certificate. The threshold is set by each university: at TUM it is an overall grade up to 1.2, with 1.3 to 1.5 being 'sehr gut bestanden'.

What GPA do German master's programmes expect?

There is no national minimum. DAAD Türkiye states that no grade requirement applies to all master's programmes in Germany; each programme decides whether it sets a minimum, ranks applicants by grade or looks mainly at subject fit. North Rhine-Westphalia restricts minimum grades by law: a master's programme there may require a 'qualified' first degree but sets no minimum overall grade as an access condition, although programmes with more applicants than places can still select by grade. In practice, read the admission regulations of each programme for the words 'Mindestnote' (minimum grade) or 'Auswahlverfahren' (selection procedure). The application side is covered in master's degrees in Germany and uni-assist step by step.

Mistakes applicants make with their converted grade

Most grade problems in German applications are not about the formula but about what goes into it. Five mistakes are easy to make, and the guidance from uni-assist and the universities quoted on this page addresses each of them; any one can cost a place in a programme that selects by grade.

MistakeWhy it mattersWhat to do instead
Using the pass mark of a single course as Nminuni-assist uses only the minimum grade for the degree; a lower Nmin flatters your gradeTake Nmin from point 4.2 of the Diploma Supplement or the examination regulations
Entering the last semester's averageThe formula needs the cumulative gradeUse the overall grade on your transcript or degree certificate
Rounding the German result upResults are cut to one decimal, not roundedWrite 2.29 as 2.2, as the universities do
Assuming every university converts like uni-assistUniversities that convert themselves may choose their own methodUse each programme's own calculator or method, and keep a copy
Ignoring the grade threshold of an earlier degreeSome master's ask for a minimum German grade in your bachelor'sCheck the admission regulations before paying any fee
Common grade mistakes and how to avoid them

Once you are enrolled, the logic reverses: your German grades will be judged by employers, scholarship committees and, if you return, by institutions in Türkiye. Strong module grades in your first semesters matter for the Deutschlandstipendium and for DAAD scholarships, and the overall grade often matters for admission to a doctorate. How master's admission weighs your grade alongside other criteria is explained in master's degrees in Germany.

The large reading room of the Saxon State and University Library (SLUB) in Dresden: rows of wooden desks with students working, surrounded by two levels of bookshelves under a skylight.
The reading room of the Saxon State and University Library (SLUB) in Dresden. Module grades in the first semesters count towards the overall grade and towards scholarship applications.Photo: Malte Larsen / Wikimedia Commons, CC BY-SA 3.0

In practice: checking your converted grade before you apply

Before you submit an application

  • Find Nmax and the graduation minimum in your Diploma Supplement (point 4.2) or your university's examination regulation.
  • Calculate the German grade yourself with the formula and cut it after one decimal.
  • Check whether the target programme publishes its own conversion method or rounding rule.
  • Prepare the official grading-system document; anabin or Wikipedia links are not accepted by uni-assist.
  • If your degree predates 2005 and used a 100-point scale, obtain the regulation then in force.
  • Compare your result with the programme's minimum grade, if any, and with its selection rules.

Whether your degree qualifies at all is a separate question, answered in does your diploma qualify? and anabin and ZAB recognition.

Frequently asked questions

How do I convert my GPA to the German grading scale?

Use the modified Bavarian formula, x = 1 + 3 × (Nmax − Nd) / (Nmax − Nmin), with Nmax as the best grade of your system, Nmin as the lowest grade needed to pass your degree, and Nd as your overall grade. Keep one decimal without rounding. For a Turkish degree, take Nmin from point 4.2 of your Diploma Supplement, as uni-assist does.

What GPA do German master's programmes require?

There is no Germany-wide minimum; each programme decides, and some rank applicants by their converted grade. North Rhine-Westphalia does not allow a minimum overall grade as an access condition, although selection by grade is still possible where places are limited. Check each programme's admission regulations.

Is 4.0 a pass or a fail in Germany?

A pass: 4.0 (ausreichend) is the lowest passing grade, and 5.0 (nicht ausreichend) is a fail. The best grade is 1.0. For averages, TUM treats anything from 4.1 upwards as nicht ausreichend.

Why do uni-assist and a university calculator give different German grades for my transcript?

Usually because they use a different lowest pass mark or a different rule on decimals. For a Turkish degree uni-assist uses the graduation minimum from your Diploma Supplement, while a university's own calculator may simply ask for the lowest passing grade; the KMK agreement cuts after one decimal, while some universities round to the nearest German grade step for their own purposes. Follow the method of the programme you are applying to.

Is a German grade of 2.0 good?

Yes. On the German scale 1.0 is the best and 4.0 the lowest pass, and a 2.0 is 'gut' (good), a performance above average. Overall grades are banded more widely than single exams: at TUM, for example, an overall 1.6 to 2.5 counts as 'gut'. There is no national minimum for master's admission; each programme decides whether it sets one.

Does my Turkish 4.00 GPA convert the same way at every German university?

Not necessarily. The modified Bavarian formula is standard, but the result depends on which lowest pass mark is used: uni-assist uses the minimum grade for the degree from your Diploma Supplement, while universities converting themselves may ask you to enter it. The same GPA can therefore become different German grades, so use the method of the programme you apply to.

Sources

14 sources, all official
  1. Vereinbarung über die Festsetzung der Gesamtnote bei ausländischen Hochschulzugangszeugnissen (Beschluss der KMK vom 15.03.1991 i. d. F. vom 12.09.2013)Kultusministerkonferenz (KMK), Zentralstelle für ausländisches Bildungswesen (Official)
  2. Länderhinweise: Türkei (documents and grade-conversion note)uni-assist e.V. (application service of German universities) (Official)
  3. Notenumrechnung mit der Bayerischen FormelTechnical University of Munich (TUM) (Official)
  4. Notenumrechnung Türkei (Stand: Juni 2026)Duale Hochschule Baden-Württemberg (DHBW) (Official)
  5. Allgemeine Prüfungs- und Studienordnung für Bachelor- und Masterstudiengänge an der TUM (APSO) vom 18. März 2011, lesbare Fassung der 12. Änderungssatzung vom 16. Dezember 2025Technical University of Munich (TUM) (Official)
  6. Examination regulations – ÜPO (non-binding English translation of key sections, incl. § 10 grading and § 14 failed examinations)RWTH Aachen University (Master programme page) (Official)
  7. Gesetz über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz – HG), Fassung gültig ab 4. August 2026Land Nordrhein-Westfalen (recht.nrw.de) (Official)
  8. Umrechnung von im Ausland erbrachten Leistungen mit der 'modifizierten Bayerischen Formel' (Stand Juli 2020)Technische Universität München – TUM Global & Alumni Office (Official)
  9. Notenumrechnung (Modifizierte Bayrische Formel)Leuphana Universität Lüneburg (Official)
  10. Info country by country – Turkeyuni-assist e.V. (Official)
  11. Educational certificates and translationsuni-assist e.V. (Official)
  12. Almanya'da yükseköğrenim (lisans ve master başvurusu)DAAD Türkiye (DAAD Information Centres Istanbul/Ankara) (Official)
  13. Gesetz über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz – HG), Fassung gültig ab 04.08.2026Land Nordrhein-Westfalen (recht.nrw.de) (Official)
  14. anabin – Türkei: Lise Diplomasi einer 12-jährigen allgemeinbildenden Sekundarschule (Bewertung mit Fallgruppen TUR-BV05 bis TUR-BV08 und TUR-BV14)Kultusministerkonferenz – Zentralstelle für ausländisches Bildungswesen (anabin) (Official)